CNC Accessories
keeps them running

Parts Idetification

Head Up / Down Sensor
Part Number: 0905
Availability: In stock.
Note: This Sensor is an optical sensor that looks up at a block coming down. If either the bottom of the block or the top of the sensor are dirty this sensor will not work. To clean the sensor just wipe off the top of it with a clean dry cloth, never spray anything on any of the sensor. Clean the block how ever you want.
Omron Sensor Plug
Part Number: 0545
Availability: In Stock.
Head Down Sensor Siemens
Part Number: 0880
Availability: In Stock.
Notes: This sensor was used for the last few machines produced.
Head down sensor mount
Part Number: 0906
Availability: In Stock.
Air Cylindar Head
Part Number: 0011
Availability: In Stock.
Air Fitting Right Angle 1/4"
Part Number: 0931
Availability: In Stock.
Notes: CNC Enhancement used many brands for Air fittings over the years, but they should be interchangable.
Air Fitting T
Part Number: 0051
Availability: In Stock.
Notes: CNC Enhancement used many brands for air fittings over the years, but they should be interchangable.
Tubing 1/4"
Part Number: 0933
Availability: In Stock.
Notes: This is sold per foot. We carry red and semi clear tubing.
Linear Bearings Ball
Part Number: 0450
Availability: In Stock.
Notes: These bearings were used on the virtical slides in the older machines, the later machines used the plastic bearings below.
Linear Bearings Plastic
Part Number: 0455
Availability: In Stock.
Notes: These bearings were used on the virtical slides in the newer machines, the older machines used the ball bearings above.