CNC Accessories
keeps them running

Autobar 400 Head Parts Front End

Encoder
Part Number: 0240
Availability: In stock.
Note: The new style encoder will fit in place of the older style. Often the problem with your machine is NOT the encoder. Before purchasing a new encoder please call 818-347-7983 for technical support. Encoders bought by mistake are not returnable.
Encoder Cover
Part Number: 0230
Availibility: In Stock.
Ball Screw Bearing Front
Part Number: 0125
Availibility: In Stock.
Measurement Assembly
Part Number: 0510
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300 & 700. The Autobar 700 is for seven inch diameter bar. These parts are also availible seperately below.
Measurement Assembly for Autobar 700
Part Number: 0509
Availibility: In Stock.
Notes: This part fits the Autobar 700 only. The Autobar 700 is for seven inch diameter bar. These parts are also availible seperately below.
First Bar Measurement Flag
Part Number: 0500
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300 & 700. The Autobar 700 is for seven inch diameter bar.
First Bar Measurement Flag AB700
Part Number: 0497
Availibility: In Stock.
Notes: This part fits the Autobar 700 only. The Autobar 700 is for seven inch diameter bar.
Measurement Tube
Part Number: 0501
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300 & 700. The Autobar 700 is for seven inch diameter bar.
Measurement Tube AB700
Part Number: 0498
Availibility: In Stock.
Notes: This part fits the Autobar 700 only. The Autobar 700 is for seven inch diameter bar.
Measurement Support Bracket
Part Number: 0502
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300 & 700. The Autobar 700 is for seven inch diameter bar.
Measurement Support Bracket AB700
Part Number: 0499
Availibility: In Stock.
Notes: This part fits the Autobar 700 only. The Autobar 700 is for seven inch diameter bar.
Second Bar Measurement Flag
Part Number: 0503
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300.
Measurement Spring
Part Number: 0505
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300.
Measurement Spring Holder
Part Number: 0504
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300.
Measurement Washer
Part Number: 0506
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300.
Limit Sensor
Part Number: 0225
Availibility: In Stock.
Notes: This part is used for the forward limit, rear limit, and bar measurement system.
Sensor Plug
Part Number: 0545
Availibility: In Stock.
Notes: This part fits all the optical sensors on the Autobars
Guide Bushing Holder
Part Number: 0369
Availibility: In Stock.
Notes: This part fits all Autobars except the Autobar 300 & 700. The Autobar 700 is for seven inch diameter bar. Some times a height adjustment needs to be made to this part, Shims are availible below for that adjustment.
Guide Bushing Holder Shim
Part Number: 0340
Availibility: In Stock.
Notes: Please specify the desired thickness.
Guide Bushing for 1 inch push rod
Part Number: 0350
Availibility: In Stock.
Guide Bushing for 1/2 inch push rod
Part Number: 0355
Availibility: In Stock.
Guide Bushing for 5/16 inch push rod
Part Number: 0370
Availibility: In Stock.
Notes: This part comes with a tube atached to help support the push rod. The tube needs to be cut to fit your machine. To find the length to cut the tube down to, set the 1/2 or 1.0 inch push rod to the front of the chuck jaws or collet pads. Then while the push rod is still even with the front of the chuck jaws or collet pads, measure the distance between the guide bushing and the push rod mount block on the carriage. Cut the tube one inch shorter then that distance.
Guide Bushing 3/8 for AB400
Part Number: 0354
Availibility: In Stock.
Notes: This guide bushing is not standard for the Autobar 400. It is used only with the special carbon fiber 3/8 push rod.